UAMA is working in conjunction with the Thomson Reuters TechStreet Store to provide on-line ordering for our publications. If the publication you are seeking isn’t yet available from TechStreet, please contact the UAMA office.

UAMA B7.1-2010
The Use, Care, and Protection of Abrasive Wheels

Standard by Unified Abrasives Manufacturers’ Association – Bonded, 08/20/2010.

Languages: English

Historical Editions: ANSI B7.1-2000

Purchase from Techstreet

UAMA B7.7-2003 (R2011)
Safety for Abrading Materials With Coated Abrasives Systems

Standard by Unified Abrasives Manufacturers’ Association – Coated, 11/12/2003.

Languages: English

Purchase from Techstreet

UAMA B74.10-2015
American National Standards Specifications for Grading of Abrasive Microgrits

Standard by Unified Abrasives Manufacturers’ Association – Grain, 01/01/2015.

Languages: English

Historical Editions: UAMA B74.10-2010, ANSI B74.10-2007, ANSI B74.10-1997 (R2001), ANSI B74.10-1977(R1992)

Purchase from Techstreet

UAMA B74.12-2012
American National Standard Specification for the Size of Abrasive Grain – Grinding Wheels, Polishing and General Industrial Uses

Standard by Unified Abrasives Manufacturers’ Association – Grain, 01/01/2012.

Languages: English

Historical Editions: UAMA B74.12-2009, ANSI B74.12-2001, ANSI B74.12, ANSI B74.12-1992

Purchase from Techstreet

UAMA B74.13-2016
Markings for Identifying Grinding Wheels and Other Bonded Abrasives

Standard by Unified Abrasives Manufacturers’ Association – Bonded, 10/21/2016.

Languages: English

Historical Editions: ANSI B74.13-1990 (R2007)

Purchase from Techstreet

UAMA B74.14-2007 (R2013)
American National Standard Methods of Chemical Analysis of Aluminum Oxide Abrasive Grain and Abrasive Crude

Standard by Unified Abrasives Manufacturers’ Association – Grain, 04/30/2007.

Languages: English

Purchase from Techstreet

UAMA B74.15-1992 (R2013)
American National Standard for Methods of Chemical Analysis of Silicon Carbide Abrasive Grain and Abrasive Crude

Standard by Unified Abrasives Manufacturers’ Association – Grain, 1992.

Languages: English

Purchase from Techstreet

UAMA B74.16-2002 (R2014)
American National Standard for Checking the Size of Diamond or Cubic Boron Nitride Abrasive Products

Standard by Unified Abrasives Manufacturers’ Association – Superabrasives, 07/12/2002.

Languages: English

Purchase from Techstreet

UAMA B74.18-2016
American National Standard for Grading of Certain Abrasive Grain On Coated Abrasive Material

Standard by Unified Abrasives Manufacturers’ Association – Coated, 11/01/2016.

Languages: English

Historical Editions: UAMA B74.18-2006

Purchase from Techstreet

UAMA B74.19-2002 (R2013)
American National Standard Test for Determining Magnetic Content of Abrasive Grains

Standard by Unified Abrasives Manufacturers’ Association – Grain, 01/01/2002.

Languages: English

Historical Editions: ANSI B74.19-1990 (R1995)

Purchase from Techstreet

UAMA B74.2-2003
American National Standard Specifications for Shapes and Sizes of Grinding Wheels, and for Shapes, Sizes and Identifications of Mounted Wheels

Standard by Unified Abrasives Manufacturers’ Association – Bonded, 02/13/2003.

Languages: English

Purchase from Techstreet

UAMA B74.20-2003 (R2010)
American National Standard Grading of Diamond Powder in Sub-Sieve Sizes

Standard by Unified Abrasives Manufacturers’ Association – Superabrasives, 02/03/2004.

Languages: English

Historical Editions: ANSI B74.20-1997

Purchase from Techstreet

UAMA B74.21-2002 (R2014)
American National Standard Fatigue Proof Test Procedure for Verified Grinding Wheels

Standard by Unified Abrasives Manufacturers’ Association – Bonded, 07/11/2002.

Languages: English

Historical Editions: ANSI B74.21-1986 (R2002)

Purchase from Techstreet

UAMA B74.22-1991 (R2007)
American National Standard Design Test for Type 27 Portable Grinding Wheels

Standard by Unified Abrasives Manufacturers’ Association – Bonded, 10/24/1991.

Languages: English

Purchase from Techstreet

UAMA B74.23-2002 (R2007)
Standard for Measuring Relative Crystal Strength of Diamond and CBN Grit

Standard by Unified Abrasives Manufacturers’ Association – Superabrasives, 10/29/2002.

Languages: English

Purchase from Techstreet

UAMA B74.24-2016
American National Standard Specification for Abrasive Materials for Blasting

Standard by Unified Abrasives Manufacturers’ Association – Grain, 2016.

Languages: English

Purchase from Techstreet

UAMA B74.3-2003 (R2008)
Specifications for Shapes and Sizes of Diamond or CBN Abrasive Products

Standard by Unified Abrasives Manufacturers’ Association – Superabrasives, 02/21/2003.

Languages: English

Purchase from Techstreet

UAMA B74.4-1992 (R2007)
American National Standards Bulk Density of Abrasive Grains

Standard by Unified Abrasives Manufacturers’ Association – Grain, 07/11/1992.

Languages: English

Purchase from Techstreet

UAMA B74.5-1964 (R2007)
American National Standards Test for Capillarity of Abrasive Grains

Standard by Unified Abrasives Manufacturers’ Association – Grain, 08/24/2007.

Languages: English

Purchase from Techstreet

UAMA B74.6-2001 (R2007)
American National Standards Procedure for Sampling of Abrasive Grains

Standard by Unified Abrasives Manufacturers’ Association – Grain, 08/24/2007.

Languages: English

Historical Editions: ANSI B74.6-1964 (R2001)

Purchase from Techstreet

UAMA B74.8-1987 (R2007)
American National Standards Procedure for Ball Mill Test for Friability of Abrasive Grains

Standard by Unified Abrasives Manufacturers’ Association – Grain, 04/26/2007.

Languages: English

Purchase from Techstreet

Publication TitleSponsorType
Abrasive MachiningBondedbooklet
Cost Reduction Principles in Grinding - With Charts for Optimizing Abrasive Machining OperationsBondedbook
Cutting-Off WheelsBondedbooklet
Disc Grinding - Safe Rules and MethodsBondedbooklet
Grinding Stresses - Cause, Effect and ControlBondedbooklet
Mounted Wheels - Safe and Efficient Operation, Standard Maximum SpeedsBondedbooklet
Safety Guide for Grinding Wheel Users - Do's and Don'ts Cartoon Sheet (English or Spanish Version)Bondedpamphlet
Safety Guide for Grinding Wheel Users - Do's and DonÕts PamphletBondedpamphlet
Safety Recommendations for Abrasive Wheel OperationBondedbooklet
Specifications of Segments Used in ChucksBondedbooklet
The Grinding Wheel (Textbook) 1976 EditionBondedbook
Wall Chart - Safety Do's and Don'tsBondedchart
American Roulette (Length 28:00)Bondedvideo
Tools That Shaped America (34:00)Bondedvideo
Change-Over (30:00)Bondedvideo
Hit the Ho-Hum On Portables (13:20)Bondedvideo
The Rule of Muldoon (17:00)Bondedvideo
Common Sense and Cutting-Off Wheels (17:00)Bondedvideo
Informational BrochureCoatedpamphlet
A Brief Introduction To Coated AbrasivesCoatedpamphlet
Do You Know What You Are BuyingCoatedpamphlet
Proper Storage of Coated Abrasive ProductsCoatedpamphlet
Safe Use of Coated Abrasives With Power Tools in the Home WorkshopCoatedpamphlet
Safety Procedures for Off-Hand Abrasive Belt Grinding and PolishingCoatedpamphlet
Safety Procedures for Abrasive Disc GrindingCoatedpamphlet
The Coated Abrasive StoryCoatedvideo
B74.11-2014, American National Standard Specification for Tumbling Chip AbrasivesGrainStandard
AGA-100-96 *ANSI and FEPA P Grade ComparisonsGrainbooklet
#1 History of Abrasive GrainsGrainbooklet
#2 Physical and Chemical Properties of Abrasive GrainGrainbooklet
#3 Abrasive Grain in Bonded Abrasive ProductsGrainbooklet
#4 Use of Abrasive Grain in the Manufacture of Coated AbrasivesGrainbooklet
#5R Use of Abrasive Grain in Pressure BlastingGrainbooklet
#6 Use of Abrasive Grain in Wire SawingGrainbooklet
#7 Use of Abrasive Grain in Mass FinishingGrainbooklet
#8 Use of Abrasive Grain in PolishingGrainbooklet
#9 Use of Abrasive Grain in Lapping, Wafering, Metallographic Polishing and the Optical IndustryGrainbooklet
#11 Use of Abrasive Grain for Anti-Slip and Floor ReinforcingGrainbooklet
#12 Electric Furnace Products for Use in Refractory ApplicationsGrainbooklet
#13 Use of Abrasive Grain as a Chemical and Metallurgical Raw MaterialGrainbooklet
#14 Use of Abrasive Grain as an Electrical MaterialGrainbooklet
#15 Silicon Carbide for Use in Metallurgical ApplicationGrainbooklet
DWMI-101-1996 Variable Effecting Superabrasive (Diamond) Wheels in Carbide GrindingSuperbooklet
DWMI-102-1996 Test Procedures for Grinding Carbides With CoolantsSuperbooklet
DWMI-103-1997 Test Procedures for Dry Grinding Tungsten Carbide With Resinoid Bonded WheelsSuperbooklet
DWMI-105-1998 Guidelines for Grinding Cemented Carbide With Diamond WheelsSuperbooklet
DWMI-106-1994 Technique for Consumer Evaluation of Resinoid Grinding WheelsSuperbooklet
DWMI-109-1984 Description of Maximum Operating Speeds and Normal Operation Speeds for Diamond and CBN WheelsSuperbooklet
DWMI-110-1996 Pencil Edging of Automotive GlassSuperbooklet
DWMI-111-1996 The Evaluation of Diamond Wheels for the Grinding of CeramicsSuperbooklet
DWMI-201-1997 Grinding With Cubic Boron Nitride (CBN)Superbooklet
Grit Size Marking Standard - Pocket Reference CardSupercard
Do's & Don'ts Pamphlet for Carbide GrindingSuperpamphlet
Superabrasives 85 ProceedingsSuperbook